Application
PVC general soft products
PVC film
PVC coated products
PVC foam products
PVC transparent sheet material
PVC paste resin
PVC hard boards and sheets
PVC Other
Item No.:
Original factory 100% high quality particle shape light green pvc other plastic raw materials
Quote Now
Advantages
Rigid PVC is one of the most widely used plastic materials. PVC material is an amorphous material.
PVC materials often contain stabilizers, lubricants, auxiliary processing agents, colorants, impact agents, and other additives in practical use.
PVC materials have non flammability, high strength, resistance to weather changes, and excellent geometric stability.
PVC has strong resistance to oxidants, reducing agents, and strong acids. However, it can be corroded by concentrated oxidizing acids such as concentrated sulfuric acid and concentrated nitric acid, and is not suitable for situations where it comes into contact with aromatic hydrocarbons and chlorinated hydrocarbons.
| Benefits |
| Lightweight, convenient for handling and loading/unloading |
| Excellent chemical resistance performance |
| Low flow resistance |
| High mechanical strength |
| Excellent electrical insulation |
| Not affecting water quality |
Installation & Testing
① Pipe cutting: according to the use requirements, after measuring the appropriate length, the required pipe can be cut by hand or machine. When cutting, keep both ends vertical and flat, and use a file to cut Deburring and sharp edge, but the chamfer should not be too large.
② Bonding of pipes and fittings: before bonding, trial assembly must be carried out, installation position must be determined and marked, length of inserted pipe end (socket depth + 10mm) and inner wall of socket of pipe fittings shall be cleaned,Then wipe with cotton yarn stained with acetone. After acetone volatilizes, evenly brush the adhesive on the outside of pipe end and inside of socket. It should not be too thick, but it should not be missed. Insert after painting and rotate. To the ideal combination angle required for installation, make all the pipes inserted into the socket, fix them by themselves after about 2 to 3 minutes, and wipe off the excess adhesive overflowing from the bonding place to keep the pipe clean. Now cut.Do not force to open or rotate the direction, otherwise it will cause leakage. The adhesive component shall not be subjected to external force within 1 hour, and shall not be watered within 24 hours. The test can be conducted only after the curing time is completed.
③ The pipeline installation must have a reliable seal to ensure that there is no leakage in the process of use. Fixing devices (pipe clamps) shall be installed every 1.5m to 2.0m.
④ Because the plastic pipe has certain plasticity, when the horizontal pipe is installed, the bracket or elevator is set every 0.6m to prevent the plastic pipe from deformation and affect the use.
⑤ The water supply pipe shall be far away from the heat source, and the clear distance between the riser and the stove edge shall not be less than 400mm, and the clear distance between the riser and the heating pipe shall not be less than 200mm.
⑥ After construction, the pipe can be sealed with soil only after passing the pressure test.
⑦ Please refer to the relevant construction specifications of the Ministry of construction for specific installation and use.
ANYTHING YOU COULDN’T FIND？
Talk With Our Sales
Dedicated to the development and export, focusing on comprehensive services that integrate product design, research and development, and production:
- Customized solutions
- OEM/ODM
- We are a professional manufacturer of household pipes & fittings.
- Professional after sales service assurance & timely delivery of spare parts.
- We have strict quality control system.
SEND US AN EMAIL
Contact Us
Unwavering in our dedication to customers and delivering cutting-edge innovations, WT stands as your steadfast ally on the journey ahead.”